Skip to product information
1 of 1

Lead Seal - Cable Entry Lead Flashing

Lead Seal - Cable Entry Lead Flashing

SKU:SKU_RNW_LEAD_SEAL_X1

Regular price
Ex VAT: £39.99
Inc VAT: £47.99
Sale price
Ex VAT: £39.99
Inc VAT: £47.99
Regular price Was: £0.00
Sale Sold out
WhatsApp Icon Any question? WhatsApp us Now!

Don't risk roof leaks or cable damage by pushing unprotected PV cables under tiles or slates. The Renew Lead Seal is a purpose-made cable entry flashing that gives you a durable, weathertight roof penetration for solar PV cables.

The MCS installation guidance for PV requires that cable penetrations through the roof should not affect the weather tightness of the roof and should be durably sealed. It names a purpose-made product as a durable way to achieve this. The Renew Lead Seal is a simple, universal way to meet that requirement on tiled and slate roofs.

The Renew flashing has a genuine lead base and a moulded black EPDM cable-entry grommet. The lead dresses tightly to the tile or slate profile, and the grommet seals each cable on its own, so cables are kept clear of the roofing materials and protected from compression and chafing.

Features & Benefits

  • Purpose-made cable entry: meets MCS guidance for sealed roof penetrations
  • Genuine lead base: fully malleable, so it dresses neatly to interlocking concrete tiles, clay tiles and slate
  • Seals up to 10 cables: stepped entry nipples seal each cable on its own. Just snip open the ones you need and leave the rest sealed.
  • High UV-resistant EPDM grommet: built for long-term outdoor exposure
  • Protects your cables: keeps DC and earth cables away from sharp tile edges and from pressure from the tiles above
  • Quick to install: cable snips are the only tool you need for the grommet
  • Universal fit: suitable for any roof pitch, on tiled and slate roofs
  • Renew branded: embossed Renew grommet for a clean, professional finish

Specifications

Base size 490mm x 410mm (easily cut down if necessary)
Base material Lead
Grommet material EPDM, black, high UV resistance
Cable entries Up to 10
Cable diameter 4mm – 8mm
Roof pitch Any
Roof type Tile and slate
Temperature range -50°C to +115°C constant (up to +150°C intermittent)
SKU SKU_RNW_LEAD_SEAL

Installation Notes

  • Lay the base under the tile course above and over the tile course below, then dress the lead to the tile profile.
  • Cut only the entry nipples you need, slightly smaller than the cable diameter, so the seal is tight.
  • Route the cables down through the grommet, keeping them clear of the tile edges.
  • Follow standard lead handling practice: wear gloves and wash your hands after handling.
View full details