Investing in solar panels is a great way to harness clean, renewable energy for your home or business. However, they can sometimes attract some unwanted visitors—birds looking for a cosy spot to nest. Pigeons, sparrows, and starlings often find the space beneath solar panels an ideal home, which can cause quite a few issues. From reducing your panels’ efficiency to creating a mess that’s tough to clean, birds nesting under your solar panels is not something you want to deal with.
Why Protecting Your Solar Panels from Birds Is Important
Birds nesting under your solar panels can be more than just a nuisance. Their nests, droppings, and other debris can block sunlight from reaching the panels, reducing how well they work. Bird droppings, in particular, are acidic and can do some serious damage if not dealt with. When exposed to the sun, these droppings can burn into the panels, creating ‘hotspots’ that reduce the efficiency of your system and may lead to expensive repairs or even replacements. Keeping birds away from your solar panels is about more than just keeping things tidy—it’s about making sure your investment performs at its best for years to come.
The Benefits of Renew Solar Bird Mesh
Renew Solar Bird Mesh offers a simple, effective way to keep birds from nesting under your solar panels. Unlike nylon pigeon netting, which can break down over time and might even trap birds, Renew Mesh is designed to be durable and safe. It provides long-lasting protection and is easy to maintain, making it a smart choice for anyone with solar panels.
Why Choose Renew Solar Bird Mesh?
- Reliable Protection: Keep pesky pigeons, sparrows, and starlings at bay with our dependable bird mesh. It creates a physical barrier that stops birds from getting under your solar panels, keeping everything clean and safe.
- Quick and Easy Installation: Renew Solar Bird Mesh is straightforward to install, making it a convenient option whether you're a DIY enthusiast or hiring a professional. It’s also easy to remove when your panels need servicing, so you can keep your system running smoothly with minimal hassle.
- Long-Lasting: Made from durable materials, Renew Mesh lasts much longer than traditional nylon netting. While there’s an initial cost, you’ll save money in the long run with lower maintenance needs since the mesh is easier to remove and refit during routine inspections.
This bird mesh is recommended by pest control experts as a trusted method for preventing birds from nesting under your solar panels, helping you keep your system efficient and clean.
How to Install Renew Solar Bird Mesh
Installing Renew Solar Bird Mesh is straightforward, and with a few simple steps, you can easily protect your solar panels:
- STEP 1: Place Clips Every 18 Inches (45 cm)
Start by placing the clips around the edge of your solar panels, spacing them every 18 inches (45 cm). Slide each clip onto the panel support bracket, making sure it’s as far out as possible so it grips the panel securely.
- STEP 2: Position the Wire Mesh Screen
Next, place the wire mesh screen so that it lines up with the clips. Make sure the fastener rod goes through the mesh at an upward angle, applying downward pressure to hold the screen firmly against the roof.
- STEP 3: Secure the Mesh with Washers
Slide a washer onto the shaft of each clip assembly until it’s snug against the mesh. Adjust the mesh as needed to ensure a tight fit. Once everything is in place, tighten the speed washer to the edge of the panel, securing the mesh. Don’t forget to overlap the mesh by 3 inches (7.5 cm) when you install the next section to make sure the coverage is complete.
- STEP 4: Trim the Excess Mesh
Finally, trim any extra mesh sticking out over the top edge of the solar panel array. Use metal shears to cut off the clip assembly rod flush with the outside of the speed washer for a clean finish.
- STEP 5. Dealing with Corners:
Outer Corners: Cut upwards from the bottom of the mesh panel until you reach the bend point. Then, bend the piece around the corner of the solar array. Secure it in place with zip ties, hog rings, or Solar Clips.
Inner Corners: Secure the first mesh panel in place so it sits snugly against the solar panel. For the second mesh panel, cut the bottom fold at a 45-degree angle to avoid interference with the first panel’s bottom bend. Lock the second panel in place using Solar Panel Clips, and if needed, use zip ties to hold the two panels together securely.
Birds nesting under your solar panels can cause a lot of problems, but with Renew Solar Bird Mesh, you can prevent them from becoming an issue in the first place. This durable, long-lasting solution not only keeps your panels free from bird-related damage but also helps maintain their efficiency and longevity.
Don’t let nesting birds damage your solar investment. Install Renew Solar Bird Mesh today and enjoy the peace of mind that comes with knowing your panels are protected by a trusted, expert-recommended solution.
